JC-CG01 Oil Filled Sensor

Parameters	MIN.	TYP.	MAX.
Linearity %FS, BFSL		±0.15	±0.25
Repeatability %FS		±01
Hysteresis %FS		±0.05	±0.1
Zero output mV DC		±1
FS Output mV DC	50
Zero thermal error %FS/℃	±0.02
FS Thermal error %FS/℃	±0.03
Compensated temperature ℃		-10～70
Storage temperature  ℃		-20℃～70℃
Long-term Stability %FS/year		±0.2	±0.3

 

Pressure Range	0～17kPa…100kPa…7MPa
Electric Performance	Power supply	1.5mA (typ)
	Electric connection	Kovar pin or 100mm silicon rubber flexible wires
	Input impedance	2kΩ～6kΩ
	Output impedance	2kΩ～6kΩ
	Insulation resistor	250MΩ/250VDC
	Overpressure	2times FS
	Pressure type	G: Gauge; A: Absolute; S: Sealed gauge
	Media compatibility	The gas or liquid which is compatible with construction material and Viton
	Impact	100g(11ms)
	Position	Deviate 45° from any orientation, zero change ≤0.05%FS
Construction	Diaphragm / Housing	stainless steel 316L
	Pin lead wire	Silicone flexible wire
	O-ring	Viton(fluororubber)
	Net weight	30g (general type)

JC-CG01 Pressure sensor
Model	Description
JC-CG01	Diameter 19mm O Ring mounting
	Code	Power Supply
	C	1.5mA
	V	5V(typical), other(OEM)
		Code	Pressure Range	Gauge	Absolute	Seal Gauge
		17K	0~17KPa	*
		35K	0~35KPa	*
		70K	0~70KPa	*
		100K	0~100KPa	*	*
		200k	0~200KPa	*	*
		350K	0~350KPa	*	*
		700K	0~700KPa	*	*
		1.4M	0~1.4MPa	*	*
		2.1M	0~2.1MPa	*	*
		3.5M	0~3.5MPa		*	*
		7M	0~7MPa		*	*
			Code	Pressure type
			G	Vent Gauge Pressure (W/O vent tube as default）
			A	Absolute Pressure
			S	Sealed Gauge
				Code	Electrical Connection
				2	Silicone flexible wire

Note:
1. Least squares fitting straight line
2. Compared with the output of 25 °C in the compensation temperature range
3. Can be used for over-range or down-range, and the amplitude is controlled within±50%FS.
4. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
5. The commonly used compensation method for products is 1.5mA constant current compensation.
6. Do not force to pull the pins or the leads of sensitive components.
7. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
8. If you have special requirements on product performance parameters and functions, please contact us.