• jc6100 industrial thermal-resistorr
  • jc6100-industrial-thermal-resistorr-03
  • jc6100-industrial-thermal-resistorr-05
  • jc6100-industrial-thermal-resistorr-02
  • jc6100-industrial-thermal-resistorr-05

TYPE:JC6100

NAME:JC6100 Industrial Thermal Resistor

JC6100 industrial thermal resistor, as a temperature measurement sensor, is usually used together with temperature transducer, regulator and display instrument to form a process control system for direct measurement or control of the temperature of liquid, vapor and gas media as well as solid surface within -200℃~500℃in various production processes. The thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When temperature gradient exists in the measured medium, the temperature measured is the average temperature of the medium where temperature-sensing element is located. We can provide you with a custom service.

Industrial Thermal Resistor overview:
JC6100 industrial thermal resistor, as a temperature measurement sensor, is usually used together with temperature transducer, regulator and display instrument to form a process control system for direct measurement or control of the temperature of liquid, vapor and gas media as well as solid surface within -200℃~500℃in various production processes. The thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When temperature gradient exists in the measured medium, the temperature measured is the average temperature of the medium where temperature-sensing element is located. Although the appearance of all thermal resistors varies widely, their basic structure is roughly similar, generally including such major components as temperature-sensing element, insulation casing, protective tube and junction box. Jiucheng can design and customize the thermal resistors you need according to your environment.

Working Principle of Industrial Thermal Resistor:
Thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When the resistance changes, the bridge passing through the temperature transducer will produce an unbalanced signal, which is converted into 4-20mA DC signal after being amplified, and then the working instrument will show the corresponding temperature value.

Industrial Thermal Resistor Features:
∗German temperature sensor, with high temperature measurement accuracy
∗Simple installation and a variety of temperature ranges optional
∗Gas-liquid dual-purpose, any medium compatible with 316L
∗German thin-film resistive element, with rapid thermal response speed and reliable and stable performance
∗Good long-term stability, low energy consumption and small size
∗Compression spring-type temperature sensor, with good vibration resistance
∗Automatic compensation of cold end temperature, using non-linear correction circuit

Industrial Thermal Resistor Application:
∗Piping and ventilation system
∗Hydraulic and pneumatic system
∗Cooling system and heating system
∗Water supply and hot water system
∗Air conditioning system

HM100(02)

Integrated Intelligent Temperature Sensor

Code

Type: Transducer (4-20mA)-B (may not be indicated as default); sensor (PT100) -P

Range

Measuring Range: 0~ X ℃,  -200℃~500℃

Code

Overall accuracy

1

0.5%FS  (PT100-Grade B)

2

0.25%   (PT100- Grade A)

3

0.1%    (PT100- Grade A)

Code

 Output Mode

V1

PT100

A1

Two-wire system 4-20mA

S1

Two-wire system 4-20mA overlapped with HART protocol intelligence

Code

Pressure interface

F1

M20x1.5 external thread

F2

G1/4 external thread

F0

Custom (including flange, special thread)

Code

Electrical connection mode

W1

Cable type (2m shielded wire)

W2

HSM Socket

W3

Air plug to 2m shielded wire

Code

Outer protective pipe diameter (insertion depth mm)

J1

Φ12 outer protective pipe (insertion depth)

J2

Φ8 outer protective pipe (insertion depth)

J3

Φ6 outer protective pipe (insertion depth)

J4

Other outer protective pipes (insertion depth)

Code

Additional selections

X

304 steel pipe (may not be indicated)

Y

316L steel pipe

F

316L stainless steel + lined PTFE

E

Intrinsically safe explosion – proof Ex iaIICT6

HM100(02) B(0~100℃)—1 —S1 —F1—W3—J1(50mm)—Y

JC6100 industrial thermal resistor, as a temperature measurement sensor, is usually used together with temperature transducer, regulator and display instrument to form a process control system for direct measurement or control of the temperature of liquid, vapor and gas media as well as solid surface within -200℃~500℃in various production processes.
More complete HD video from YouTube: click here

Leave a Reply

Your email address will not be published. Required fields are marked *