• Ceramic pressure sensor
  • Ceramic pressure sensor JC-C01
  • Ceramic pressure sensor JC-C01

TYPE:JC610

NAME:High-accuracy Pressure Transducer JC610

JC610 High-accuracy Piezoresistive Pressure Transducer is encapsulated in a stainless steel case through assembly and commissioning by use of advanced foreign silicon piezoresistive sensitive elements. Both the case and interface materials are made of stainless steel. The medium is of good compatibility, with stable & reliable performance and high accuracy. The gasket is sealed on the end face.

High-accuracy Pressure Transducer JC610

●Product Overview

JC610 High-accuracy Piezoresistive Pressure Transducer is encapsulated in a stainless steel case through assembly and commissioning by use of advanced foreign silicon piezoresistive sensitive elements. Both the case and interface materials are made of stainless steel. The medium is of good compatibility, with stable & reliable performance and high accuracy. The gasket is sealed on the end face.

●Product Features

*Measuring range:-0.1MPa~0~10kPa…70MPa
*Total stainless steel construction
*Standard thread pressure-leading measuring method
*Power supply at constant-current and -voltage source
*Laser resistance-trimming compensation zero and full-scale temperature performance
*Using solid-state piezoresistive pressure sensor, with high reliability and high accuracy.
*Small size, diversified and optional structural forms

●Product Application

*Pressure measurement of various dynamic & static *Aerospace
*Automotive electronics gases and liquid media *Pneumatic control
*Ventilation system *Industrial measurement

Measuring range -0.1MPa~0~10KPa…70MPa
Overload capacity Two times of the measuring scale for overpressure
Power supply 1.5mA DC 10~24V DC constant voltage
Zero output 0±2 mV DC 0±2 mV DC
Full scale output 70~110mVDC 70~110mV DC
Measuring Media The gas or liquid compatible with 316 stainless steel
Overall accuracy (Linearity, repeatability and hysteresis) ±0.1%FS ±0.25%FS ±0.4%FS
Long-term stability ≤±0.1%FS/year
Operating temperature -40~85℃
Compensation temperature -10~50℃
Temperature performance Zero temperature coefficient:
±0.02%FS/℃(Typical value);±0.04%FS/℃(Maximum value)
Sensitivity temperature coefficient:
±0.02%FS/℃(Typical value); ±0.04%FS/℃(Maximum value)
Thermal hysteresis ±0.1%FS/℃(Typical value)
Materials Enclosure:
Stainless steel 1Cr18Ni9Ti
Membrane:
Stainless steel 316L
Cable: polyvinyl chloride cable Sealing:Fluorine rubber sealing ring
Electrical connection PG7 cable connection Connector DIN43650
Response Time(10%~90%) ≤1 ms
Resolution Infinitely small(theoretic),1/100000(normal)
Insulation resistance 100MΩ / 500VDC
Enclosure protection class IP67(Cable type) IP65(Socket type)
Weight About 250g
Vibration No change under 10gRMS, 20 ~ 2000Hz
Impact 100g,11 milliseconds
JC610 High-accuracy Pressure Transducer

Pressure type

Gauge pressure(G may not be indicated);
Absolute pressure(A);
Sealed reference pressure(S)
Range ( 0~ X  KPa or MPa)

Code

Overall accuracy (linearity + repeatability + hysteresis)

1

  ±0.4%FS

2

  ±0.25%FS

3

  ±0.1%FS

Code

 Power supply

D1

 10~24VDC constant voltage

D2

 1.5mA DC constant current

Code

Signal output

V1

0±2mV~90±20mV

Code

 Additional functions

F1

M20x1.5 external thread

F2

G1/4 external thread

F0

Special

W1

Cable type(IP67,2m)

W2

Aerial socket type(IP65)

P

Flush diaphragm type

E

Intrinsically safe explosion-proof type Ex iaIICT5
JC610 (0~200KPa)—1 —D1 —V1 —F2—W1—E    High- accuracy Pressure Transducer

 

Tips for Type Selection
1.When installing the flush diaphragm product on the site, adopt the correct sealing means to prevent any influence on product stability by installation stress.
2.The Company may, according to users’ requirements, provide products at 70MPa or higher pressure or at a wide temperature compensation range.
3.As an additional function code for type selection, the code “E” for intrinsically safe explosion-proof type Ex ia II CT5 denotes that power source must be supplied via safety barrier.
4.For other special requirements, please discuss with us.

Leave a Reply

Your email address will not be published. Required fields are marked *