JC23 Ceramic Piezoresistive Pressure Transmitter Description:
JC23 ceramic piezoresistive pressure transmitter is an industrial measuring instrument that is modular in design and meets global OEM standards. The ceramic piezoresistive pressure transmitter is stable and reliable, and has excellent cost performance. JC23 ceramic piezoresistive pressure sensor is rugged and durable to meet the requirements of more stringent industrial standards. JC23 ceramic piezoresistive pressure sensor is widely used in industrial support, industry support and equipment support. The ceramic piezoresistive pressure transmitter includes a variety of options, which are applied to different industries and different working conditions. JC23 ceramic piezoresistive pressure transmitter solves the needs for economic pressure monitoring in different occasions and serves a wide range of industries.
JC23 ceramic piezoresistive pressure transmitter adopts ceramic diaphragm as the base pressure sensor. Ceramic is a recognized material with high elasticity, corrosion resistance, wear resistance, shock resistance and vibration. The thermal stability of ceramics and its thick film resistance allow it to operate over a temperature range of -40 to 135 ° C, with high precision and high stability. Electrical insulation >2kV, strong output signal, and long-term stability. High-performance, low-cost ceramic sensors will be the development direction of pressure sensors, and have a broad application prospect in the world.
Widely used in engineering control, environmental control, hydraulic and pneumatic equipment, servo valves and transmissions, chemical and chemical industries, and medical instruments.
JC23 Ceramic Piezoresistive Pressure Transmitter Features:
* Measuring range: 0~2bar……400bar
* 2.5% error in the full temperature range from -20 to 80 °C.
* Temperature compensation range can be special -40~125°C
* High reliability, low drift
* Small size, low cost, integrated
* Anti-vibration, high temperature resistance, anti-corrosion
* Current and voltage multi-proportional output form
* Electromagnetic compatibility (EMC) protection, comply with IEC standards
JC23 Ceramic Piezoresistive Pressure Transmitter Application:
* Refrigeration compressor
* Pneumatic system
* Agricultural machinery equipment
* Industrial Automation
* Automotive industry
Size and Outline:

Electrical Connections:
Description |
PG7 Grand lock head outlet
1m Shielded cable |
A type Hessman Plug |
M12x1 Aviation plug
Straight out or Corner out 1m unshielded cable |
Code |
W1 |
W2 |
W3/W4 |
Diagram |
 |
 |
 |
Protection Grade |
IP67 |
IP65 |
IP67 |
Ambient Temperature |
-40~85℃ |
-40~85℃ |
-40~85℃ |
Current output wiring definition |
RED:V+
BLUE:OUT+ |
1#:V+
2#:OUT+ |
BROWN(1#):V+
BLUE(3#):OUT+ |
Voltage output wiring definition |
RED:V+
BLUE:OUT+
YELLOW:GND |
1#:V+
2#:OUT+
3#:GND |
BROWN(1#):V+
BLUE(3#):OUT+
BLACK(4#):GND |
Current output wiring diagram |
 |
Voltage output wiring diagram |
 |
Selection code S-pulse buffer media status and application:
 |
Application
Cavitation, liquid hammer, and peak pressure may occur in the hydraulic system, such as when the value is quickly closed or the pump is turned on and off. Such problems may occur at the inlet and outlet ends, even if the operating pressure is extremely low. |
Media Status
The inclusion of particulate matter in the liquid may cause nozzle clogging. Mounting the sensor in a vertical position minimizes the risk of nozzle clogging, as the nozzle can only contact the liquid after the inactive volume of the nozzle orifice is filled with liquid at startup. The influence of the viscosity of the medium on the response time is very small. Even if the viscosity is as high as 100cSt, the response time will not exceed10ms |