• JC-CZ16 Oil Filled Sensor
  • JC-CZ16 Oil Filled Sensor
  • JC-CZ16 Oil Filled Sensor
  • JC-CZ16 Oil Filled Sensor
  • JC-CZ16 Oil Filled Sensor

TYPE:JC-CZ16

NAME:JC-CZ16 Oil Filled Sensor (0-10MPa…70MPa, 1.5mA)

JC-CZ16 oil filled sensor are based on piezoresistive silicon pressure sensors packaged in a 316L stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element.

JC-CZ16 Oil Filled Sensor Introduction:

JC-CZ16 oil filled sensor are based on piezoresistive silicon pressure sensors packaged in a 316L stainless steel housing. The sensing package utilizes silicon oil to transfer pressure from the 316L diaphragm to the sensing element.

JC-CZ16 oil filled pressure sensor are 0-10Mpa…70MPa high range sealed gauge sensors. It is designed for O-ring mounting for the applications where compatibility with corrosive media is required.

Each sensor was strictly temperature compensated for both zero and span.

JC-CZ16 Oil Filled Transducer Features:

* High stability, High accuracy
* Pressure range:0-10MPa…70MPa
* Wide operable temperature
* Compatible with corrosive media
* Standard mounting size

JC-CZ16 Oil Filled Transducer Application:

* Process control
* Fresh and waste water measurements
* Medical and food instruments
* Pressure transmitters

Dimensions(mm):

JC-CZ16 Oil Filled Sensor

Specifications of current excitation(1.5mA, 25℃)

Parameters Min. Typical Max.
Accuracy(%FS) Non-Linearity1 ≤40KPa ±0.10 ±0.15
Accuracy(%FS) Non -Linearity1 70MPa ±0.20 ±0.35
Hysteresis ±0.05 ±0.10
Repeatibility ±0.05 ±0.10
Zero2 Output(mV) -1 ±0.5 1
Span(FS) Output(mV) 180 450
Operation Temp.(℃)3 -40 125
Compensated Temp.(℃) -10 70
Zero Temp.error(%FS)4 ±0.5 ±0.75
Span Temp. error(%FS)4 ±0.75 ±1.0
Thermal hysteresis(%FS) 0.1
Long term Stability/Zero (±%FS annual) 0.1
Long term Stability/Span (±%FS annual) 0.1
Supply Current(mA) 0.5 1.5 2
Input Resistance(KΩ) 3 4.5 6
Output Resistance(KΩ) 3.5 5 6.5
Load Resistance5(MΩ) 5
Insulation Resistance(100V)6(MΩ) 100
 
Pressure Range 0-10MPa…70Mpa
Overpressure ≤40Mpa 2X
70Mpa 100MPa
Media–Pressure Liquids and Gases compatible with 316L Stainless Steel
Remark 1. Best fit straight line. 2. Measured at vacuum for absolute (A), ambient for gage (G). 3. Maximum temperature range for product with standard cable is -20°C to +105°C. 4. Over the compensated temperature range with respect to 25°C. 5. Load resistance to reduce measurement errors due to output loading. 6. Between case and sensing element
JC-CZ16 Pressure sensor
Model Description
JC-CZ16 Diameter 19mm O Ring mounting
Code Power Supply
C Constant current
Code Pressure Range
10MPa 0-10MPa
20MPa 0-20MPa
40MPa 0-40MPa
70MPa 0-70MPa
XXX Customized
Code Pressure type
1 Connect Pins
2 Ribbon Cable(90mm as default)
X Special
Note: 1. Can be used for down-range, and the amplitude is controlled within ±50%FS. 2. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product. 3. The commonly used compensation method for products is 1.5mA constant current compensation. 4. Do not force to pull the pins or the leads of sensitive components. 5. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component. 6. If you have special requirements on product performance parameters and functions, please contact us.

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply

Your email address will not be published. Required fields are marked *