We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / Transmitter Regular / Temperature Transmitter

JC100 Integrated Temperature Transmitter

(1000 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Technical Parameters
  • Ordering Information
  • Reviews


JC100 series of industrial thermal resistor, as a temperature measurement sensor, is usually used together with temperature transducer, regulator and display instrument to form a process control system for direct measurement or control of the temperature of liquid, vapor and gas media as well as solid surface within -200℃~500℃ in various production processes. The thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When temperature gradient exists in the measured medium, the temperature measured is the average temperature of the medium where temperature-sensing element is located. Although the appearance of all thermal resistors varies widely, their basic structure is roughly similar, generally including such major components as temperature-sensing element, insulation casing, protective tube and junction box.

Working Principle

Thermal resistor measures temperature by using the characteristic that the resistance itself changes with the change of temperature of substance. When the resistance changes, the bridge passing through the temperature transducer will produce an unbalanced signal, which is converted into 4-20mA DC signal after being amplified, and then the working instrument will show the corresponding temperature value. 


* German temperature sensor, with high temperature measurement accuracy
* Simple installation and a variety of temperature ranges optional
* Gas-liquid dual-purpose, any medium compatible with 316L
* German thin-film resistive element, with rapid thermal response speed and reliable and stable performance
* Good long-term stability, low energy consumption and small size
* Compression spring-type temperature sensor, with good vibration resistance
* Automatic compensation of cold end temperature, using non-linear correction circuit


* Piping and ventilation system
* Hydraulic and pneumatic system 
* Cooling system and heating system
* Water supply and hot water system
* Air conditioning system
Measuring range -200℃~500℃
Measured medium Gas or liquid compatible with 304 or 316 L stainless steel
Output Sensor (PT100); transducer (two-wire system 4-20mA+HART protocol)
Power supply 10~36V DC
Overall accuracy ±0.5%FS  ;  ±0.25%FS  ; ±0.1%FS
Allowable error Graduation PT100: Grade A (±0.15+0.002 ltl); Grade B (±0.30+0.005 ltl)
Withstand voltage Typical: 40bar (Max:300bar)
Long-term stability ±0.1%FS/ year
Response time T=50℃ 2.3s ; T=90℃  5.4s
Electrical protection Reverse polarity protection and optional surge voltage protection
Ambient temperature -40~+85℃
Storage temperature -40~+125℃
Installation mode Plug-in (insertion depth: beyond 50mm thread; can be customized)
Probe dimensions Φ12, Φ8, Φ6 (mm), others
Liquid-contacting material 304 stainless steel, 316 stainless steel, 316L stainless steel lined PTFE
Damping Adjustable 0-32 seconds
Protection degree IP65  ;  IP67
Resistance to mechanical vibration 10~60HZ, 0.21mm sine wave
ARFI IEC61000-4-3, 20V/M,80~1000MHZ
Executive standard IEC584 ;IEC1515;GB/T16839-199;JB/T5582-91
JC100 Integrated Temperature Transmitter
  Code Type: Transducer (4-20mA)-B (may not be indicated as default); sensor (PT100) -P
  Range Measuring Range: 0~ X ℃, e.g.: 0~100℃
  Code Overall accuracy
1 0.5%FS (PT100-Grade B)
2 0.25% (PT100- Grade A)
3 0.1% (PT100- Grade A)
  Code Output Mode
V1 PT100
A1 Two-wire system 4-20mA
S1 Two-wire system 4-20mA overlapped with HART protocol intelligence
  Code Pressure interface
F1 M20x1.5 external thread
F2 G1/4 external thread
F0 Custom (including flange, special thread)
  Code Electrical connection mode
W1 Cable type (2m shielded wire)
W2 HSM Socket
W3 Air plug to 2m shielded wire
  Code Outer protective pipe diameter (insertion depth mm)
J1 Φ12 outer protective pipe (insertion depth)
J2 Φ8 outer protective pipe (insertion depth)
J3 Φ6 outer protective pipe (insertion depth)
J4 Other outer protective pipes (insertion depth)
  Code Additional selections
X 304 steel pipe (may not be indicated)
Y 316L steel pipe
F 316L stainless steel + lined PTFE
E Intrinsically safe explosion-proof Ex iaIICT6
JC100B(0~100℃)—1 —S1 —F1—W3—J1(50mm)—Y   Integrated Temperature Transmitter

Tips of Selection

1. The measured medium shall be compatible with the material contacting with the product.
2. Please contact us for other special requirements and clearly indicate them in the order.
Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login