• Guide Rails Temperature Transmitter Module
  • Guide Rails Temperature Transmitter Module
  • Guide Rails Temperature Transmitter Module
  • Guide Rails Temperature Transmitter Module
  • Guide Rails Temperature Transmitter Module

TYPE:JC-D5138

NAME:JC-D5138 Guide Rails Temperature Transmitter Module

Guide Rails Temperature Transmitter Module 
Use with on-site thermal resistance or thermocouple,they are installed in the DIN guide rails of the junction box or nearby controller. The thickness of  module is only 12.5mm, could meet the intensive installation  situation and allow the centralized access of all  connected  measuring point. No need individual power supply while connecting with 2-wire loop directly.

Guide Rails Temperature Transmitter Module Features:

Guide Rails Temperature Transmitter Module
Use with on-site thermal resistance or thermocouple,they are installed in the DIN guide rails of the junction box or nearby controller. The thickness of  module is only 12.5mm, could meet the intensive installation  situation and allow the centralized access of all  connected  measuring point. No need individual power supply while connecting with 2-wire loop directly.

Model Name JC-D5138 Guide Rails Temperature Transmitter Module
Input Input signal Thermal resistance:Pt100,Cu50,Pt1000…etc total 11 types
Thermocouple K,E,S,B,R,J,T,N…etc total 10types
Resistance value 0…..2000Ω
Mv:-75…75mV
Measuring rage Thermal resistance 20ºC / Thermocouple 50ºC
Sensor Connection 2-wire,3-wire,4-wire
Cold end compensation interior /  fixation
Cold end compensation accuracy ±1ºC /error free
Cold end compensation range -40…85ºC/unlimited
Max line resistance permitted 50Ω/wire
Output  digital signal output HART protocol
Analog signal output 4~20mA / 20 ~ 4mA
signal transmission characteristic  linear with temperature output
Range overflow 3.8mA…20.5mA(linear)
Sensor Fault Alarm ≤3.6mA or≥ 21.5mA
Limited-current ≤25mA
Load resistance RL≤(Ue-9V)/0.025A(current output)
Electric isolation 1500V AC(input/output)
power supply Power supply Loop powered
Voltage range 9….30V DC
Reverse Current Protection Yes
Voltage drop 9V
EMC electrical fast transient / burst immunity test 2 class
RFEMS >10V/m(80MHz…1000MHz)
Parameter Installation method DIN Guide Rails
Configuration mode DIP switch+ PC configurable+ HART communicator
conversion accuracy 0.2ºC/0.2%
Temperature drift 0.008% FS/1ºC
Response time 1s
Starting time 4s
Insulation resistance ≥100MΩ
Operating temperature -40…85ºC
Relative humidity ≤95%RH
Enclosure protection class IP00/IP67
 Outline Dimension 12.5x99x115mm
Hole pitch of Instllament 35mm Guide Rails

Use with on-site thermal resistance or thermocouple,they are installed in the DIN guide rails of the junction box or nearby controller. The thickness of  module is only 12.5mm, could meet the intensive installation  situation and allow the centralized access of all  connected  measuring point. No need individual power supply while connecting with 2-wire loop directly.
More complete HD video from YouTube: click here